184 lines
5.8 KiB
Plaintext
184 lines
5.8 KiB
Plaintext
# VesiScan BASIC - Zephyr configuration
|
|
# Stage 1: GPIO + Power Control + LED + Debug Logging
|
|
# Stage 2: BLE (NUS)
|
|
|
|
CONFIG_GPIO=y
|
|
|
|
# Debug Message (RTT)
|
|
# Build-time switch for project DBG_PRINTF/DBG_CORE/DBG_ERR macros.
|
|
CONFIG_VESIS_DEBUG_PRINT=n
|
|
# Zephyr logging subsystem enable.
|
|
CONFIG_LOG=y
|
|
# Print logs immediately when log API is called.
|
|
CONFIG_LOG_MODE_IMMEDIATE=y
|
|
# Default log level: 3 = INFO.
|
|
CONFIG_LOG_DEFAULT_LEVEL=2
|
|
# Do not add ANSI color codes to logs.
|
|
CONFIG_LOG_BACKEND_SHOW_COLOR=n
|
|
# Enable printk().
|
|
CONFIG_PRINTK=y
|
|
# Send Zephyr LOG output to SEGGER RTT.
|
|
CONFIG_LOG_BACKEND_RTT=y
|
|
# Enable SEGGER RTT support.
|
|
CONFIG_USE_SEGGER_RTT=y
|
|
# Enable Zephyr console subsystem.
|
|
CONFIG_CONSOLE=y
|
|
# Send console/printk output to RTT.
|
|
CONFIG_RTT_CONSOLE=y
|
|
# If RTT buffer is full, wait instead of dropping logs.
|
|
CONFIG_LOG_BACKEND_RTT_MODE_BLOCK=y
|
|
# RTT log backend output buffer size.
|
|
CONFIG_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE=1024
|
|
|
|
# Disable UART logging/console/serial driver. This project uses RTT instead of UART.
|
|
CONFIG_LOG_BACKEND_UART=n
|
|
CONFIG_SERIAL=n
|
|
CONFIG_UART_CONSOLE=n
|
|
|
|
# BLE stack
|
|
# Enable Zephyr Bluetooth host stack.
|
|
CONFIG_BT=y
|
|
# Keep Bluetooth internal logs at warning level.
|
|
CONFIG_BT_LOG_LEVEL_WRN=y
|
|
# Operate as a BLE peripheral device.
|
|
CONFIG_BT_PERIPHERAL=y
|
|
# Default local device name. Runtime advertising name is set from SERIAL_NO by bt_set_name().
|
|
CONFIG_BT_DEVICE_NAME="VBT260300ZZ"
|
|
# Allow runtime BLE name change with bt_set_name(SERIAL_NO).
|
|
CONFIG_BT_DEVICE_NAME_DYNAMIC=y
|
|
# Maximum runtime BLE name length. Current serial number is 12 characters.
|
|
CONFIG_BT_DEVICE_NAME_MAX=16
|
|
# Allow only one simultaneous peripheral link.
|
|
CONFIG_BT_MAX_CONN=1
|
|
|
|
# BLE NUS (Nordic UART Service)
|
|
# Enable Nordic UART Service for BLE data exchange.
|
|
CONFIG_BT_NUS=y
|
|
|
|
# BLE PHY
|
|
# Disable 2M PHY so the link stays on 1M PHY.
|
|
CONFIG_BT_CTLR_PHY_2M=n
|
|
|
|
# GATT / MTU
|
|
# Enable GATT client support. May be removable if no client API is used.
|
|
CONFIG_BT_GATT_CLIENT=y
|
|
# L2CAP TX MTU. ATT MTU is this value minus 3 bytes.
|
|
CONFIG_BT_L2CAP_TX_MTU=247
|
|
# BLE ACL TX buffer size for larger MTU packets.
|
|
CONFIG_BT_BUF_ACL_TX_SIZE=251
|
|
# BLE ACL RX buffer size for larger MTU packets.
|
|
CONFIG_BT_BUF_ACL_RX_SIZE=251
|
|
|
|
# Connection parameters
|
|
# Preferred minimum connection interval: 12 x 1.25ms = 15ms.
|
|
CONFIG_BT_PERIPHERAL_PREF_MIN_INT=12
|
|
# Preferred maximum connection interval: 12 x 1.25ms = 15ms.
|
|
CONFIG_BT_PERIPHERAL_PREF_MAX_INT=12
|
|
# Slave latency 0: do not skip connection events.
|
|
CONFIG_BT_PERIPHERAL_PREF_LATENCY=0
|
|
# Supervision timeout: 1000 x 10ms = 10s.
|
|
CONFIG_BT_PERIPHERAL_PREF_TIMEOUT=1000
|
|
|
|
# BLE security (production)
|
|
# Enable BLE Security Manager Protocol for pairing/bonding.
|
|
CONFIG_BT_SMP=y
|
|
# Allow bonding so pairing information can be stored and reused.
|
|
CONFIG_BT_BONDABLE=y
|
|
# App provides the passkey through the auth callback.
|
|
CONFIG_BT_APP_PASSKEY=y
|
|
# Require MITM-protected pairing.
|
|
CONFIG_BT_SMP_ENFORCE_MITM=y
|
|
# Allow only LE Secure Connections pairing.
|
|
CONFIG_BT_SMP_SC_ONLY=y
|
|
# Store and restore BLE bond/security information through settings.
|
|
CONFIG_BT_SETTINGS=y
|
|
# Maximum number of stored bonded peers.
|
|
CONFIG_BT_MAX_PAIRED=20
|
|
# Production secure boot: disable flash patching so only signed flash code can run.
|
|
CONFIG_DISABLE_FLASH_PATCH=y
|
|
|
|
# ADC (battery)
|
|
# Enable Zephyr ADC driver for battery voltage measurement.
|
|
CONFIG_ADC=y
|
|
|
|
# I2C (IMU: ICM42670P)
|
|
# Enable Zephyr I2C driver for IMU communication.
|
|
CONFIG_I2C=y
|
|
|
|
# Direct nrfx SPIM3 driver for ADC121S051
|
|
# Enable nrfx SPIM driver for direct echo ADC SPI control.
|
|
CONFIG_NRFX_SPIM=y
|
|
|
|
# System
|
|
# Heap memory available for runtime dynamic allocation.
|
|
CONFIG_HEAP_MEM_POOL_SIZE=4096
|
|
# Stack size for Zephyr system workqueue thread.
|
|
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
|
|
|
|
# BLE RX stack sizes
|
|
# BLE RX thread stack size. Helps prevent overflow during RX/security processing.
|
|
CONFIG_BT_RX_STACK_SIZE=4096
|
|
|
|
# DFU
|
|
# Build the application for MCUboot bootloader environment.
|
|
CONFIG_BOOTLOADER_MCUBOOT=y
|
|
# Enable zcbor library used by mcumgr/SMP/DFU CBOR payloads.
|
|
CONFIG_ZCBOR=y
|
|
# Version string used by MCUboot imgtool signing and versioned DFU zip naming.
|
|
CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="0.0.0+0"
|
|
|
|
# Internal flash
|
|
# Enable internal flash driver.
|
|
CONFIG_FLASH=y
|
|
# Enable flash partition/slot lookup APIs.
|
|
CONFIG_FLASH_MAP=y
|
|
|
|
# Persistent application settings (FDS replacement)
|
|
# Enable Zephyr NVS storage.
|
|
CONFIG_NVS=y
|
|
# Enable Zephyr settings subsystem.
|
|
CONFIG_SETTINGS=y
|
|
# Use NVS as the settings backend.
|
|
CONFIG_SETTINGS_NVS=y
|
|
# Number of flash sectors used by settings/NVS backend.
|
|
CONFIG_SETTINGS_NVS_SECTOR_COUNT=2
|
|
# settings_storage partition size. 0x2000 = 8KB.
|
|
CONFIG_PM_PARTITION_SIZE_SETTINGS_STORAGE=0x2000
|
|
|
|
# mcumgr framework
|
|
# Enable mcumgr management framework.
|
|
CONFIG_MCUMGR=y
|
|
|
|
# mcumgr over BLE transport
|
|
# Enable mcumgr/SMP messages over BLE SMP service.
|
|
CONFIG_MCUMGR_TRANSPORT_BT=y
|
|
# Require authenticated BLE connection for mcumgr read/write operations.
|
|
CONFIG_MCUMGR_TRANSPORT_BT_PERM_RW_AUTHEN=y
|
|
# Reassemble SMP packets fragmented over BLE.
|
|
CONFIG_MCUMGR_TRANSPORT_BT_REASSEMBLY=y
|
|
# mcumgr transport receive buffer size for DFU image chunks.
|
|
CONFIG_MCUMGR_TRANSPORT_NETBUF_SIZE=1024
|
|
|
|
# CBOR (mcumgr/SMP/DFU command payload format)
|
|
# Maximum CBOR byte/string length.
|
|
CONFIG_ZCBOR_MAX_STR_LEN=512
|
|
|
|
# mcumgr callbacks/hooks
|
|
# Enable mcumgr management event notification hooks.
|
|
CONFIG_MCUMGR_MGMT_NOTIFICATION_HOOKS=y
|
|
# Enable image upload/DFU status hooks.
|
|
CONFIG_MCUMGR_GRP_IMG_STATUS_HOOKS=y
|
|
# Enable SMP command done/failed status hooks.
|
|
CONFIG_MCUMGR_SMP_COMMAND_STATUS_HOOKS=y
|
|
|
|
# mcumgr command groups
|
|
# Enable image management group: upload, test, confirm, state.
|
|
CONFIG_MCUMGR_GRP_IMG=y
|
|
# Enable OS management group: reset and OS-related commands.
|
|
CONFIG_MCUMGR_GRP_OS=y
|
|
|
|
# MCUboot image handling
|
|
# Enable image manager for MCUboot image state/verify/confirm operations.
|
|
CONFIG_IMG_MANAGER=y
|
|
# Write uploaded image data to flash as a stream.
|
|
CONFIG_STREAM_FLASH=y |